The IWE1100-Ab Series wireless Access Point, based on IEEE 802.11b Technology, delivers access point features enabling cost effective access for mobile users to corporate Ethernet-based LANs.
In addition, the IWE1100-Ab Series supports (optional) IEEE 802.1x-compliant and RADIUS (Remote Authentication Dial-In User Services) in the ‘ Advanced ‘ product category, the most up-to-date wireless security solution for applications in public places such as airports, hotels, fast-food restaurants, etc. People with mobile computers can utilize services offered by access points within these areas to connect to the Internet securely and with virtually no effort. The standard protocol format allows WISPs (Wireless Internet Service Providers) bill the usage of their wireless services through IWE1100-Ab Series through their RADIUS servers.
Moreover, the IWE1100-Ab Series provides standard WDS (Wireless Distribution System) bridge functionality joining LAN segments that may be geographically separated (e.g., in two buildings, or in campus) to a complete network. Up to 6 WDS bridge links work in AP function simultaneously, enabling LAN segments to be flexibly connected to mirror any network topology which a traditional wired network can achieve. The bundled Antenna Alignment Utility provides the at-a-glance way to easily assist the antenna deployment through the friendly Windows-based user interface!
The optional POE function allows the power feeding by Ethernet cable to eliminate the additional power line requirement in special install environment. With the sleek and intuitive Web-based user interface, the IWE1100-Ab can be easily managed and satisfied by system integrators’ various requirements.
Features:
• Wireless
-IEEE802.11b compliant
-High transmit power up to 200mW
-WDS - static bridging
-AP client - dynamic bridging
- AP browsing with signal strength
- Preferred ESSID/BSSID selection
-Transmit power control
-Associated wireless clients status
-Data rate settings
• Public hotspots
-Link integrity
-Wireless client isolation (Adv.)
-AP load balancing (Adv.)
-Association control (Adv.)
• Networking
-DHCP client & server
-Current DHCP mapping table
-Packet filtering (Ethernet/TCP/UDP/Port)
•Security
-64/128-bits WEP
-IEEE802.1x/EAP-MD5, EAP-TLS, EAP-TTLS and PEAP support (Adv.)
-Disabling SSID broadcasts
-MAC-address-based access control
-VPN pass-through
• Management
-Web-based/WNM(Windows)/SNMP:
-Web-based, Windows-based and UPnP
-Secure administration
-SNMP v1 & v2
-SNMP traps: Standard and private traps
-MIB II, IEEE 802.11, IEEE 802.1d, IEEE 802.1x,and private enterprise MIB
-System log
-Firmware upgrade via HTTP and TFTP
-Configuration backup & restore
-Hardware watchdog timer
-Wireless Network Manager
Product specifications :
Standards : IEEE802.11b for Wireless LAN; IEEE802.3u 10/100BaseTX for Ethernet LAN
Frequency Range : 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Operating Channels : USA: 1-11 (FCC)
Canada : 1-11 (IC)
Europe : 1-13 (ETSI)
France : 10-13
Japan : 1-14
Antenna : 2dBi diversity antennas depending on model variations
Security : 64-bit and 128-bit WEP encryption, IEEE 802.1x/RADIUS (Advanced)
Transmit Power : 17dBm typical
Receiver Sensitivity : Better than -85dBm
Line-of-Sight Range : 1200ft (400meters) with outdoor line of sight
Client OS Support : Windows 95/98/2000/ME/NT/XP, Unix and Macintosh
Supported Protocols : NAT, PAP/CHAP, PPPoE, PPP, HTTP, DHCP, TCP/IP, RADIUS, DNS,
NetBIOS, AppleTalk, and IPX/SPX
Operating Voltage : DC +5V or Power over Ethernet supported power (optional)
Network Architecture : Infrastructure, Wireless Distribution System (WDS)
Physical Dimensions : 175mm (L) × 145mm (W) × 50mm (H)
Temperaturev : Operating temperature: 0-55oC
Storage temperature: -20-70oC
Humidity : 5%-95% non-condensing in storage
Diagnostic LEDs : Power, LAN Link/ACT, RF Link/ACT, System Alive
Emissions : FCC Part 15 Class B & CE
2,4 Ghz
7,2 - 8,4 GHz
